Select the connected Bluetooth device, check the Bluetooth serial port COM that the
computer is using, and the COM port of the outgoing direction (DPS5015_001'Port') is the
serial port of the Bluetooth connection.(Note: Win 7 system, select the Bluetooth device,
right click to view the properties, display the following window, view the COM port of the
Bluetooth settings, select the "outgoing direction" serial port to connect; Win 10 system,
select the Bluetooth device, click "More Bluetooth option", the following window is
displayed, view the COM port of the Bluetooth setting, and select the serial port to connect
in the outgoing direction.)
Note:
The power supply voltage of communication interface is DC 3.3V and power supply
ability is limit. Don’t connect other big power Bluetooth or WIFI module, otherwise it will be
burnt.
When using the Bluetooth communication function, if power off for digital power supply,
you need to choose COM interface to connect Bluetooth module again after power on.
If the LED on Bluetooth module is flashing, it shows it is on the state of disconnection.
If LED is lighting, it shows it is on the state of connection.
When using Bluetooth function, don’t put Bluetooth module in the metal box,
otherwise it will affect signal strength, Bluetooth communication distance is up to 10 meters
in an open and unobstructed condition.
When modifying communication data of digital power supply, you must disconnect
Bluetooth with PC, the LED will be flashing. Otherwise you can change the data of Bluetooth
board.
For computer operating system, please install official version. if you install pirated or lite
operating system, there may be a lack of Bluetooth virtual serial port driver on those
operating system, and the system can’t assign COM port to Bluetooth board. And it can’t
communicate with the upper computer.
Do not touch components on the Bluetooth communication module, they are fragile
and can be easily broken.
2.4 Installed the Computer Software
Please download file one by one,do not download all files at the same time,otherwise you will be
