RDC6563F Standalone Fiber Cutting Control System User Manual V2.0
44
SHENZHEN RUIDA TECHNOLOGY CO., LTD
In the completion/idle state, all function buttons can be operated, and the user can perform
file processing, user and vendor parameter setting, file preview and other operations.
In the running/pause state, in order to ensure the safe operation of the machine, some
buttons cannot be operated, such as positioning, frame, user, manufacturer, file and other
buttons.
3.4 User parameters
User parameters: Cutting parameters, LFS parameters, process parameters, Manual speed,
reset speed, other parameters.
When entering the user parameters, the panel will read the mainboard parameters
automatically and display them, and display the progress of the read parameters on the [Read
Parameters] option. After all parameters have been read, the user can press the [Up/Down] key
to move the blue cursor to select parameters, such as [Following Parameters], [Process
Parameters], etc. The parameter area on the right side displays the corresponding parameter. If
the user does not need to modify the parameter, press [Exit] to return to the previous menu.
If the user needs to modify the parameters, press the [Right] key, then the blue cursor
switches to the first parameter in the right parameter area, as shown below:
