RDC6445GT5 Laser cutting system hardware user manualV1.1
深圳市睿达科技有限公司
31
Figure 8.3
On the right side of the interface is the menu bar, including “Layer”, “Properties” and “Main
Interface”, which respectively indicate file layer information, file properties and return to the main
interface. The layer menu is selected by default and marked in blue in the interface. Click “Main
Interface” to return to the main interface.
8.3.1 Layer information
In the file parameter interface, click “Layer” on the right to display the layer information of this file. The
layer information can be obtained after previewing the file or starting the processing, otherwise it
prompts that there is no layer information. The interface is shown in Figure 8.3.
The bottom of the interface shows all the layer numbers of the file. If the total number of layers exceeds
6, user can browse through the page button on the left. After selecting a layer, the corresponding layer
information will be displayed synchronously. For the modification method of the layer parameters,
please refer to the previous section, so it won’t be repeated here. After modifying the parameters, the
parameters are saved in the file permanently.
8.3.2 File properties
In the file parameter interface, click “Properties” on the right to display the file information. Including
“Repeat”, “Feed”, “Array” and “Working hours”, which respectively represent repeating processing,
feeding parameters, array information and working hours preview. “Repeat” is selected by default in the
interface and marked in blue. As shown below:
