Cutting machine AR 10
18
*
Increased load and usage, e.g. through multiple shift operation or short
cycle times of the machine or pressure pulses.
**Operational Safety Ordinance (Germany).
The national applicable regulations must be observed!
g)
Check the distance between cut-off knife and grid frame; ad-
just if necessary!
h)
Grease all moving parts in the machine compartment!
5.3
Repairs and spare parts
As a damaged part on a machine is usually damaged due to causes
unrelated to the part, always carry out a fault diagnosis.
Contact our Service Hotline at +49 (0)7748 523 11 for spare parts or
malfunctions. Please keep the machine type and number to hand.
6
Disposal
All materials and operating fuels must be separated and
disposed of in accordance with nationally applicable regu-
lations!
1.
The following components contain oil:
•
Hydraulic system (unit, cylinder, hoses)
•
Cutter drive
The hydraulic unit is equipped with an oil drain plug.
The gearbox must be opened at the cutter drive!
2.
The following components have lubricating grease:
•
All chains, sprockets, bearings
7
Technical documentation
7.1
Technical data
Supply voltage:
400 V 50/60 Hz 3-phase AC / N / PE
Power consumption:
3.8 kW
