Cutting machine SR 1 / SR 1 Turbo
3
1
Safety Instructions
!!! Observe the safety instructions during the installation, operation,
cleaning and maintenance of the Rühle cutting machine!
Hazard potentially causing irreversible injuries if
disregarded.
Warning, potentially causing serious injuries if
disregarded.
Note
Work on electrical equipment of the machine may only
be carried out by qualified technicians!
Always disconnect machine from the mains during this
process!
1.1
Safety instructions
!!! A supervisor (responsible person) must be appointed for the
machine!
This person must:
a)
Completely read and understand these operating instructions
before transport, commissioning, setup, operation, cleaning,
decommissioning, care / maintenance as well as dismantling /
disposal!
b)
Prepare work instructions for the intended and safe
transport, commissioning, setup, operation, cleaning,
decommissioning, care / maintenance as well as dismantling /
disposal!
c)
Make sure that the qualified workers have completely read
and understood the respective work instructions according to
section 1.1b!
d)
Proper functioning of the protective devices must be checked
at least once a year by a Rühle service technician!
