17
Getting Started
Chapter 2.
Getting Started
This section provides an outline of the steps necessary to setup a new PX501. A detailed
guide follows the listed items, see as follows.
For additional technical assistance, contact your RuggON representative. See
“Contacting
RuggON”
on page 52.
It is recommended to installing or remove accessories on a clean, well-lit work
surface. To protect yourself and the device from electrostatic discharge, wear anti-
static wrist straps or place the device on an anti-static mat.
First Time Use
PX501 is under
“Battery Ship Mode” and will not power on to preserve the battery and prevent
power loss. To enable
“Regular Mode” and activate the battery, please connect the power
adapter to power on.
Charging the Battery
When you use the AC adapter to connect your PX501 to a power outlet, the standard and
external (optional) battery will automatically begin to recharge.
While the battery is charging, the power LED will be active. When the battery is fully charged, the
power LED is lit a solid green.
1. Flip open the DC-IN cover to expose the DC-IN jack.
Figure 9. Opening the DC-IN Cover
Summary of Contents for PX501C8H
Page 1: ...PX501 Gen III User s Manual...
Page 53: ......
