RuggedCom RuggedSwitch RSG2300, Installation Manual

Page: 50 / 52

Chapter 6
Certification
RUGGEDCOM RSG2300
Installation Guide
40 Other Approvals
• China RoHS 2
Administrative Measure on the Control of Pollution Caused by Electronic Information Products
A copy of the Material Declaration is available online at https://support.industry.siemens.com/cs/ww/en/
view/109738831 .
Section 6.1.9
Other Approvals
This device meets the requirements of the following additional standards:
•
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices in Electric
Power Substations
• IEC 61000-6-2
Electromagnetic Compatibility (EMC) – Part 6-2: Generic Standards – Immunity for Industrial Environments
• IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General Requirements
Section 6.2
EMC and Environmental Type Tests
The RUGGEDCOM RSG2300 has passed the following Electromagnetic Compatibility (EMC) and environmental
tests.
EMC Type Tests per IEC 61850-3
Test Description Test Levels Severity Levels
Enclosure Contact ±8 kV IEC 61000-4-2 ESD
Enclosure Air ±15 kV
4
IEC 61000-4-3 Radiated RFI Enclosure Ports 20 V/m
Signal Ports ±4 kV @ 2.5 kHz
DC Power Ports
AC Power Ports
IEC 61000-4-4 Burst (Fast Transient)
Earth Ground Ports
a
±4 kV 4
Signal Ports ±4 kV Line-to-Ground,
±2 kV Line-to-Line
4
DC Power Ports ±2 kV Line-to-Ground,
±1 kV Line-to-Line
3
IEC 61000-4-5 Surge
AC Power Ports ±4 kV Line-to-Ground,
±2 kV Line-to-Line
4
Signal Ports IEC 61000-4-6 Induced (Conducted) RFI
DC Power Ports
10 V 3