1. The ROX™ Web Interface
ROX™ v2.2 User Guide
31
RuggedBackbone™ RX1500
interfaces
The interfaces menu displays the status of functions configured via the interface menu. For example,
eth functions can be configured using the eth submenu that is accessible from the interface menu.
The eth status can be viewed by clicking on the eth submenu of the interfaces menu.
switch
The switch menu is used for configuring Layer 2 packet switching functions. Functions included are
port security, DHCP relay agent, port mirroring, multicast filtering, CoS, mac tables, spanning tree,
VLANs, layer 3 switching and net discovery. You can also reset switched ports and clear switched
port statistics and cable diagnostic test results.
tunnel
The tunnel menu is used for configuring IP tunnels using IPsec, Layer 2 tunnelling functions and
Generic Routing Encapsulation (GRE).
ip
The ip menu is used for configuring the ROX™ system’s IP network interfaces.
qos
The qos menu is used for configuring traffic control.
routing
The routing menu is used for configuring the routing features. Included are sections on dynamic,
static, status and multicast routing.
security
The security menu is used for configuring security, including the firewall.
services
The services menu is used for configuring various services. These services include timekeeping,
VRRP, DHCP server and linkfailover.
1.3. Making Configuration Changes
In order to make configuration changes, select the desired Edit Private mode from the configuration
view. The same navigation window, tables and forms are redisplayed, but with additional controls, as
illustrated below.
