RuggedCom RSG2488 User Manual Download

Page: 40 / 194

Chapter 2

Using ROS

RUGGEDCOM RSG2488

User Guide

Logging Out

Guest

Username: guest
Password: guest

Operator

Username: operator
Password: operator

Admin

Username: admin
Password: admin

CAUTION!

To prevent unauthorized access to the device, make sure to change the default guest, operator,

and admin passwords before commissioning the device.
For more information about changing passwords, refer to

Section 4.3, “Configuring Passwords”

2. In the

Enter User Name

field, type the username for an account setup on the device.

3. In the

Enter Password

field, typ the password for the account.

4. Press

Enter

or click

Login

(Web interface only).

Section 2.3

Logging Out

To log out of the device, navigate to the main screen and do the following:
• To log out of the Console or secure shell interfaces, press

CTRL

• To log out of the Web interface, click

Logout

Figure 4: Web Interface

Logout

NOTE

If any pending configuration changes have not been committed, ROS will request confirmation before

discarding the changes and logging out of the device.

Summary of Contents for RSG2488



































































































































































































Search results

Summary of Contents for RSG2488

Reviews:

Related manuals for RSG2488

Brands by name

Popular brands

RuggedCom RSG2488, User Manual

Search results

Summary of Contents for RSG2488

Reviews:

Related manuals for RSG2488

Brands by name

Popular brands