Chapter 5
Setup and Configuration
RUGGEDCOM RSG2488
User Guide
158
Deleting a Static MAC Address
7
5
6
4
3
2
1
Figure 112: Static MAC Addresses Form
1.
MAC Address Box
2.
VID Box
3.
Port
4.
Apply Button
5.
Delete Button
6.
Reload Button
3. Configure the following parameter(s) as required:
Parameter
Description
MAC Address
Synopsis:
##-##-##-##-##-## where ## ranges 0 to FF
A MAC address learned by the switch.
VID
Synopsis:
0 to 65535
The VLAN Identifier of the VLAN on which the MAC address operates.
Port
Synopsis:
0 to 65535 or { Multi, Local }
The port on which MAC address has been learned.
MULTI - multicast address, so there is no switch port associated with this MAC address.
Type
Synopsis:
{ Static, Dynamic }
This describes how the MAC address has been learned by the switch:
STATIC - the address has been learned as a result of a Static MAC Address Table
configuration or some other management activity and can not be automatically
unlearned or relearned by the switch.
DYNAMIC - The address has been automatically learned by the switch and can be
automatically unlearned.
CoS
Synopsis:
{ Normal, Crit }
Specifies what Class Of Service is assigned to frames carrying this address as source
or destination address.
4. Click
Apply
.
Section 5.4.3.3
Deleting a Static MAC Address
To delete a static MAC address from the Static MAC Address Table, do the following:
1. Navigate to
MAC Address Tables > Configure Static MAC Addresses
. The
Static MAC Addresses
table
appears.
