RUGGEDCOM RSG2488
User Guide
Chapter 5
Setup and Configuration
Configuring DSCP to CoS Mapping
153
Figure 104: Priority to CoS Mapping Table
2. Select a priority level. The
Priority to CoS Mapping
form appears.
4
3
2
1
Figure 105: Priority to CoS Mapping Form
1.
Priority Box
2.
CoS List
3.
Alarm Button
4.
Reload Button
3. Configure the following parameter(s) as required:
Parameter
Description
Priority
Synopsis:
0 to 7
Default:
0
Value of the IEEE 802.1p priority.
CoS
Synopsis:
{ Normal, Medium, High, Crit }
Default:
Normal
CoS assigned to received tagged frames with the specified IEEE 802.1p priority value.
4. Click
Apply
.
Section 5.3.4
Configuring DSCP to CoS Mapping
Mapping CoS to the Differentiated Services (DS) field set in the IP header for each packet is done by defining
Differentiated Services Code Points (DSCPs) in the CoS configuration.
To map a DSCP to a Class of Service, do the following:
1. Navigate to
Classes of Service > Configure DSCP to CoS Mapping
. The
DSCP to CoS Mapping
table
appears.
