Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 388 / 410

374
Command Line Interface
POE Commands
POE Commands
Power over Ethernet Commands configure the transmission of electrical power along with
data on Ethernet cabling on the switch. The switch supports IEEE 802.3af/802.3at and
enable/disable POE for each port on the system. Users may set POE priority as Critical/
High/Low for each port on the system.
• ZS4124 supports 802.3af on all 24 ports and total 180W budget.
• ZS4224 supportS 802.3at on all 24 ports and total 375W budget.
power-inline
Enables or disables the Power Over Ethernet (POE) function on each interface.
Command Mode: Interface Configuration
Syntax
power-inline {auto | never}
Description
■
auto
- Enables POE functionality on the interface. Enabled by default.
■
never
- Disables POE functionality on the interface.
Example
Switch(config)# interface GigabitEthernet 1/4
Switch(config-if)#
power-inline
auto