Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 329 / 410

315
Command Line Interface
802.1X Commands
dot1x control-direction
Configures 802.1x control direction (traffic).
Command Mode: Interface Configuration
Syntax
dot1x control-direction {both|in}
Description
■
{both}
- Controls dot1x authentication on incoming and outgoing traffic.
■
{in}
- Controls dot1x authentication on incoming traffic.
Example
!Sets bi-directional (both) traffic authentication on port 5.
Switch(config)#
interface
gigabitEthernet 1/5
Switch(config-if)#
dot1x control-direction
both
Switch(config-if)#