Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 320 / 410

306
Command Line Interface
ACL Commands
IP access-list
Applies access lists to port interfaces.
NOTE: The relationship between access lists and an interface is one to many, meaning,
an interface may be applied with at most one ACL, while an ACL may applied to more than
one interface.
Command Mode: Interface Configuration
Syntax
[no] IP access-list <list_name>
Description
■
<list_name>
- Sets the list name to apply on an interface.
■
no IP access-list
- Removes access list rules from an interface.
Example
!Applies list1 on interface gigabitEthernet 1/1
Switch(config)#
interface
GigabitEthernet 1/1
Switch(config-if)# IP access-list list1
Switch(config-if)#
!Removes list1 from interface gigabitEthernet 1/1
Switch(config)# interface GigabitEthernet 1/1
Switch(config-if)# no IP access-list list1
Switch(config-if)#