Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 259 / 410

245
Command Line Interface
Multiple Spanning Tree Commands
spanning-tree mst shutdown
Enables or disables spanning tree on the interface. Disabled by default.
Command Mode: Interface Configuration
Syntax
[no] spanning-tree mst shutdown
Example
!Disables MSTP on port 4
Switch(config)#
interface
GigabitEthernet 1/4
Switch(config-if)#
spanning-tree mst shutdown
Switch(config-if)#
!Enables MSTP on port 4
Switch(config)#
interface
GigabitEthernet 1/4
Switch(config-if)# no spanning-tree mst shutdown
Switch(config-if)#
spanning-tree mst port-priority
Specifies port priority.
Command Mode: Interface Configuration
Syntax
spanning-tree mst port-priority <priority>
Description
■
<priority>
- Specifies the valid priority values. Values are 0, 16, 32, 48, 64, 80, 96, 112,
128, 144, 160, 176, 192, 208, 224, and 240. All other values are rejected. Default is 128.
Example
!Sets port 4 to priority 64.
Switch(config)# interface GigabitEthernet 1/4
Switch(config-if)# spanning-tree mst port-priority 64
Switch(config-if)#