Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 225 / 410

211
Command Line Interface
Layer-2 Interface Commands
port monitor
Configures a port to monitor the traffic from another port.
NOTE: Enable monitor in global configuration mode after setting the monitor port.
Command Mode: Interface Configuration
Syntax
[no] port monitor <port> direction <direction>
Description
■
<port>
- Sets the port to be monitored.
■
direction <direction>
- Sets the data direction to be monitored, may be rx, tx, or
both. rx: monitors received packets. tx: monitors transmitted packages. both: monitors
received and transmitted packets.
■
no port monitor
- Disables port monitoring. Default.
Example
!Sets port 2 as the monitoring Port for port 4 with bi-direction (both)
monitoring.
Switch(config)# interface GigabitEthernet 1/2
Switch(config-if)# port monitor 1/4 direction both
Switch(config-if)#
!Disables port 2 as a monitoring port.
Switch(config)# interface GigabitEthernet 1/2
Switch(config-if)#
no port monitor
1/4
Switch(config-if)#