Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 207 / 410

193
Command Line Interface
SNMP Commands
SNMP-server notify
Specifies the notify for SNMP protocol. Trap version is defined by target-parameters sec-
model. Trap set by default.
Command Mode: Global Configuration
Syntax
[no] SNMP-server notify <NotifyName> tag <TagName|none>
Description
■
<NotifyName>
- Sets the notification name.
■
tag <TagName|none>
- Sets the tag value. Value must match the tag list in the
snmpTargetAddressTable.
■
no SNMP-server notify
- Disables the notify community name.
Example
!Sets SNMP notify community name
Switch(config)#
SNMP-server notify
1 tag X
Switch(config)#
!Disables SNMP notify community name
Switch(config)#
no SNMP-server notify
1
Switch(config)#