Ruckus Wireless ZoneSwitch 4124, User Manual

Page: 205 / 410

191
Command Line Interface
SNMP Commands
SNMP-server viewtree
Specifies the SNMP protocol viewtree.
NOTE: You must first create a group using the SNMP group command and also an SNMP
group access command to configure an SNMP view tree (read/write/notify).
Command Mode: Global Configuration
Syntax
[no] SNMP-server view-tree <ViewName> subtree <OID> mask <mask OID
format>
Description
■
<ViewName>
- Sets the viewtree name.
■
subtree <OID>
- The object identifier for the group.
■
mask <mask OID format>
- Defines the view’s subtree.
■
no SNMP-server view-tree
- Disables the specified SNMP viewtree name
Example
!Sets SNMP Viewtree name and parameters.
Switch(config)#
SNMP-server view-tree
readonly subtree 1.3.6 mask
1.1.1
Switch(config)#
!Disables the specified SNMP Viewtree name and parameters.
Switch(config)#
no SNMP-server view-tree
readonly subtree 1.3.6
Switch(config)#