Ruckus Wireless ZoneDirector 3000, User Manual, Page: 211 / 430

Working with Hotspot Services
Assigning a WLAN to Provide Hotspot Service
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
211
NOTE: If ZoneDirector is located behind a NAT device and signed certificates are
used with portal authentication, a static entry must be added to the DNS server to
resolve ZoneDirector’s private IP address to its FQDN. Otherwise, client browsers
may enter an infinite redirect loop and be unable to reach the login page. Before the
signed certificate gets added the client gets redirected to the IP address of the ZD
instead of the FQDN.
Assigning a WLAN to Provide Hotspot Service
After you create a hotspot service, you need to specify the WLANs to which you
want to deploy the hotspot configuration. To configure an existing WLAN to provide
hotspot service, do the following:
1 Go to
Configure
>
WLANs
.
2 In the WLANs section, look for the WLAN that you want to assign as a hotspot
WLAN, and then click the
Edit link that is on the same row. The Editing (WLAN
name) form appears.
3 In
Type
, click
Hotspot Service (WISPr)
.
4 In
Hotspot Services
, select the name of the hotspot service that you created
previously.
5 Click OK to save your changes.