Ruckus Wireless ZoneDirector 3000, User Manual, Page: 191 / 430

Creating a New WLAN for Workgroup Use
Advanced Options
ZoneDirector 9.8 User Guide, 800-70599-001 Rev B
191
Figure 102. Configuring WLAN service schedule
Creating a New WLAN for Workgroup Use
If you want to create an additional WLAN based on your existing default WLAN and
limit its use to a select group of users (e.g, Marketing, Engineering), you can do so
by following these steps:
1 Make a list of the group of users.
2 Go to
Configure
>
WLANs
.
3 When the WLANs page appears, the default internal and guest networks are
listed in the table (once you have created a WLAN, it will appear in this table).
4 If you have no need for custom authentication or encryption methodologies in
this new WLAN, locate the default WLAN record and click
Clone
.
5 A workspace appears, displaying the default settings of a new WLAN, using the
same configuration settings as the default WLAN.