Ruckus Wireless ZoneDirector 3000, User Manual, Page: 120 / 430

Configuring Self Healing Options
Active Client Detection
120
Ruckus Wireless, Inc.
2 Scroll down to the Ekahau Settings section (near the bottom of the page).
3 Select the Enable Ekahau tag detection check box.
4 Enter the Ekahau Controller IP address and Ekahau Controller Port .
5 Click the Apply button in the same section to save your changes.
ZoneDirector enables Ekahau tag detection on all its managed APs that support
this feature.
Figure 63. Enabling Ekahau tag detection
Active Client Detection
Enabling active client detection allows ZoneDirector to trigger an event when a client
with a low signal strength joins the network.
To enable active client detection:
1 Go to
Configure > Services
, and scroll down to the Active Client Detection
section.
2 Click the check box next to Enable client detection ... and enter an RSSI
threshold, below which an event will be triggered.
3 Click
Apply
to save your changes.