2.
Select or deselect those for which you want or don't want to receive emails.
3.
Click
Apply
to save your changes.When any of the selected events occur,
ZoneDirector sends an email notification to the email address that you specified in
the section. With the exception of the event, ZoneDirector only sends one email alarm
notification for each event. If the same event happens again, no alarm will be sent
until you clear the alarm on the
Monitor
>
All Alarms
page. On the other hand,
ZoneDirector sends a new alarm notification each time the Lost contact with AP event
occurs.
Configuring SMS Settings for SMS Guest Pass
Delivery
If you want to deliver Guest Passes to your guests via SMS, you can configure
ZoneDirector to use an existing Twilio or Clickatell account for SMS delivery. The first
step is to inform ZoneDirector of your Twilio or Clickatell account information.
1.
Go to
Configure
>
System
.
2.
Locate the
SMS Settings
section, and select either Twilio account information or
Clickatell account information.
3.
Enter your Account SID, Auth Token and From Phone Number (Twilio) or your User
Name, Password and API ID (Clickatell).
4.
Click the
Test
button to test your settings.
5.
Once confirmed, click
Apply
to save your changes.
You can now allow guest pass generators to deliver guest pass codes to guests using
the SMS button when generating a new guest pass. (You must also enter a phone
number for receiving the SMS messages for each guest pass created.).
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
64
Configuring System Settings
Configuring SMS Settings for SMS Guest Pass Delivery
