manualshive.com logo in svg

Ruckus Wireless ZoneDirector 1200, User Manual

Share
Download
Ruckus Wireless ZoneDirector 1200 User Manual Download Page 295

Figure 222: Monitoring Rogue Access Points

Monitoring System Information

The Monitor > System Info page provides general overview of the ZoneDirector, as well
as information on Ethernet port status, Smart Redundancy status, and Location Services
status, if any.

Monitoring System Ethernet Port Status

To view the status of ZoneDirector's Ethernet ports, go to Monitor > System Info. The
table displays the MAC address, Interface ID, physical link status, link speed, and total
packets/bytes received/transmitted on the port since last restart.

Figure 223: Monitoring ZoneDirector Ethernet port information

295

Ruckus Wireless ZoneDirector™ Release 10.0 User Guide

Monitoring Your Wireless Network

Monitoring System Information

Summary of Contents for ZoneDirector 1200










































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands