tasks they are designed to do without interference from or control (other than supplying
USB power) by the Ruckus Wireless network equipment.
USB ports are enabled by default. To disable the USB ports for all APs of a specific
model in an AP group:
1.
Go to
Configure
>
Access Points
.
2.
In
Access Point Groups
, click
Edit
next to the group you want to configure.
3.
Locate the
Model Specific Control
section, and select the AP model that you want
to configure from the list.
4.
In
USB Port
, select
Disable USB Port
.
5.
Click
OK
to save your changes.
Figure 136: Disabling AP USB ports
Configuring AP Ethernet Ports
You can use AP groups to control Ethernet ports on all APs of a certain model. Then, if
you want to override the port settings for a specific AP, you can do so as explained in
the Managing Access Points Individually section below.
To configure Ethernet ports for all APs of the same model:
1.
Go to
Configure
>
Access Points
2.
In
Access Point Groups
, click
Edit
next to the group you want to configure.
3.
Locate the
Model Specific Control
section, and select the AP model that you want
to configure from the list.
4.
In
Port Setting
, select
Override System Default
. The screen changes to display
the Ethernet ports on the AP model currently selected.
Ruckus Wireless ZoneDirector™ Release 10.0 User Guide
200
Managing Access Points
Configuring AP Ethernet Ports
