Configuring the SCG for the First Time
Creating a Registration Rule
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.4, 800-71126-001 Rev A
73
Figure 33. Creating an AP registration rule
To create another registration rule, repeat the preceding steps. You can create as
many registration rules as you need to manage access points on the network.
Configuring the Rule Priority
The SCG applies registration rules in the same order as they appear in the AP
Registration Rules table (highest to lowest priority). If you want a particular registra-
tion rule to have higher priority, you must move it up the table. Once an AP matches
a registration rule, the SCG assigns the AP to the zone specified in the rule and
stops processing the remaining rules.
Follow these steps to configure the rule priority.
1
Go to
Configuration
>
AP Zones
.
2
On the sidebar on the left, click
AP Registration Rules
. The AP Registration
Rules page appears and displays the rules that you have created.
3
Change the priority of each registration rule as required.
