Configuring the SCG for the First Time
Configuring AAA Servers and Hotspot Settings
SmartCell Gateway 200 Getting Started Guide for SmartZone 3.4, 800-71126-001 Rev A
65
AP zone created successfully. Do you want to view the zone
information?
5
Click
Yes
to view the zone details, or click
No
to close the confirmation message
and return to the zone list.
You have completed creating your first AP zone. You can create additional AP zones,
if needed.
Configuring AAA Servers and Hotspot
Settings
NOTE:
If you do not have an AAA server on the network, skip this step.
If you have an existing RADIUS (AAA) server on the network, you can set up hotspot
services across the network using the Ruckus Wireless access points that the SCG
is managing. To provide hotspot services, you need to add at least one AAA server
to the SCG and create a hotspot service.
AAA servers and hotspot settings must be configured on a per-AP zone basis.
Adding an AAA Server
Follow these steps to add an AAA server to an AP zone.
1
Go to
Configuration > AP Zones
.
2
Click the AP zone for which you want to add an AAA server. Alternatively, click
the AP zone from the
Management Domains
tree.
3
Under the
AP Zones
menu on the sidebar, click
AAA
.
4
Click
Create New
. The
Create New RADIUS Server
form appears.
5
In the
General Options
section, configure the following settings:
•
Name
: Type a name for the AAA server that you are adding.
•
Description
: Type a description for the AAA server that you are adding.
•
Type
: Click either
RADIUS
or
RADIUS Accounting
, depending on the type
of RADIUS server that you are using. Click
RADIUS Accounting
to add an
accounting server (All the other steps are the same as for the authentication
server).
•
Backup RADIUS
: If a backup RADIUS server exists on the network, you may
enable RADIUS backup support by selecting the
Enable backup RADIUS
support
check box.
