Ruckus ICX 7850 Switch Hardware Installation Guide
65
Part Number: 53-1005580-01
Power Supplies
Grounding the Ruckus ICX 7850 Switch
FIGURE 43
DC Power Supply Wiring Terminals
9.
Make sure the screws are tight with no wire touching the ground screw.
10. Using the handle on the power supply, hold the power supply level and guide it into the power supply slot. Gently push the power
supply all the way into the slot, ensuring that it firmly engages with the connector and the release lever clicks into its locked
position.
When the Ruckus ICX 7850 switch is powered on, the power LED on the front of the device lights up green to confirm that the power
supply is correctly installed and supplying power. Refer to
Grounding the Ruckus ICX 7850 Switch
The rear panel of the Ruckus ICX 7850 switch includes a dual-screw grounding terminal for chassis grounding. The surface area around
this terminal is not painted to provide a good electrical connection. Before connecting power to the device, connect the grounding lug to
ground the chassis if required by your local building code or regulatory compliance.
FIGURE 44
Connecting the Grounding Terminal
1
DC power terminals
2
Safety ground screw
1
Grounding terminal
