VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER
’S MANUAL Ver.A3
154
4.3.3 Spanning Tree
4.3.3.0 STP system
The Spanning Tree Protocol (STP) is a standardized method (IEEE 802.1d) for avoiding loops in switching networks. Enable STP
to ensure that only one path at a time is active between any two nodes on the network. You can enable STP on web management’s
switch setting advanced item, select enable STP. We are recommended that you enable STP on all switches ensures a single active
path on the network. You can view STP information about the Root Bridge. Such as following screen.
Fig. 4.3.3.0a STP system
