VS-2400S 24 Ports VDSL2 Managed IP DSLAM with POTS splitter USER
’S MANUAL Ver.A3
104
4.1 Remote Network Management
IP Setting
You must setup the “IP Address” with the local serial console port (RS-232 Port), and then you can use this IP address to control
this Ethernet Switch by
Telnet
and
WEB.
Or you can change your computer’s IP domain same with Ethernet Switch. Then use the
default IP address to control this Switch
1. Remote control by “Telnet”
To enter Telnet, type the IP address of the Ethernet Switch to connect management system. And type User name and password.
Default User Name: admin
Default Password: admin
Notes:
1. For security purpose, we limit the user log-in number on Telnet and Console port. Thus
you can’t log-in Telnet and Console port at
the same time. But you can log-in Telnet and Console port at a different time.
2. WEB Login does not have user login limitation.
When you would like to finish console port configuration, you need log-out to leave. Otherwise you ca
n’t access Telnet.
3. Please note that you need logout when you exit the telnet function.
