3.7
Wall Panel H Installation
Align the lap joint between
Front Right Side (H)
and
middle position
Repeat Right Side (E).
c.
H
H
H
Screw Holes
Using a screwdriver, punch out the screw holes on the
top of the middle position
Front Right Side (H)
2 places.
a.
Drill a pilot hole (using 1/8" drill bit) in front lower corner
at location indicated by screw target.
Note: This pilot hole is to be drilled through both walls.
b.
OVERHEAD VIEW
DETAIL
3-1_B
SCALE 1/1
DETAIL
3-3_E
SCALE 1/1
DETAIL
3-3_B
SCALE 1/1
DETAIL
3-4_B AND 3-5_B
SCALE 1/1
DETAIL
3-6_B AND 3-7_B
SCALE 1/1
E
H
1
2
E
H
