RTW SurroundMonitor 11900 Series, Manual, Page: 354 / 376

13 | Preset List | 13.1 | General EN-164 SurroundMonitor 11900 Series
13.1 | general
13 | Preset List
next pages give a summary of these input and output routing
settings.
Common for all the Presets are the main parameters listed
below. For the complete description of the
Peakmeter Set-
tings
, the
loudness Settings
and the corresponding
chan-
nel Group Settings
please refer to
Input Routing
chapter
further ahead.
The parameters of the units are hold in 7 Factory Presets and
7 User Presets. After unpacking the unit, the User Presets
named
u1
to
u7
hold the same content as the Factory Presets
named F8 to F14 , but they can be overwritten anytime to store
individual user settings. To do so please refer to
Saving Pre-
sets
section of
First Use
chapter further ahead. In the Factory
Presets and their corresponding Sub Presets the channel con-
figurations for usual appli cations are stored. The tables on the
13.2 | Peakmeter Settings
General PPM settings
• Weighting Filter: Awt+RMS (Leq(A))
• RMS response: fast
• Peak Hold fallback time: 1 s
Main Peakmeter Channel Group settings
• Standard Settings Digtial: Digital
• Scale: Dig60dB
• Integration time: Sample
• PH Integration Time: Integration Time
• DC-Filter: 5 Hz
• Headroom: –9 dBFS
• Operation indicator area: 0 dB
• Standard Settings Analog: Din
• Scale: Din5dB
• Integration time: 10 ms
• PH Integration Time: Integration Time
• Operation indicator area: 0 dB
• VU-Lead: 0 dB
• Bargraph enabled: all
• SPL Reference indicator: enabled