RTW SurroundMonitor 11900 Series, Manual, Page: 316 / 376

9 | Menu | 9.4 | Input/Output Routing: The Global Routing Settings EN-126 SurroundMonitor 11900 Series
After having selected one of the loudness options in the Pro-
gram Meter
combo box on the
Key 1
to
Key 7
menu pages
and selecting the
PPM + loudness Settings
button, pres-
sing the
Channel Group
button on the
PPM + loudness
Settings menu page shows the Channel Group menu page.
This page is used to configure the way the bargraphs in the
channel section of the
Program Meter
work. In normal display
mode, these bargraphs are shown in the left area of the
Pro-
gram Meter in window 2.
The Channel Group consists of 2 bargraphs in 2 channel ste-
reo mode and 6 bargraphs in 5.1 mode. Each bargraph shows
a combination of
PPM
and
loudness
bargraphs (the loudness
section of this display mode conforming to the selected loud-
ness standard). Various options for the combined display of
loudness and PPM bargraphs are available (see below).
9.4.1.10 | Parameters available in the Channel Group (Loudness modes)
This chapter refers to the parameters shown in the
Channel Group
after one of the loudness modes was selected to be the
Program Meter
mode.
NOTE -
For the parameters shown after
PPM
mode was selected to be the
Program Meter
mode, please refer to
Pa-
rameters available in the Channel Groups (PPM mode)
chapter.
Channel Group in loudness modes