RTW SurroundControl 31960 Series, Manual, Page: 408 / 430

14 | Preset List | 14.1 | General EN-192 SurroundControl 31900/31960 Series
14.1 | General
The parameters of the units are hold in 7 Factory Presets and 7 User Presets. After unpacking the unit, the User Presets named
14 | Preset List
next pages give a summary of these input and output routing
settings.
Common for all the Presets are the main parameters lis-
ted below. For the complete description of the
Peakmeter
Settings , the Loudness Settings and the corresponding
Channel Group Settings please refer to Monitoring Input
Routing chapter further ahead.
U1 to U7 hold the same content as the Factory Presets named
F8 to F14 , but they can be overwritten anytime to store indi-
vidual user settings. To do so please refer to Saving Presets
section of First Use chapter further ahead. In the Factory
Presets and their corresponding Sub Presets the channel con-
fi gurations for usual appli cations are stored. The tables on the
14.2 | Peakmeter Settings
General PPM Settings
• Weighting Filter: Awt+RMS (Leq(A))
• RMS response: fast
• Peak Hold fallback time: 1 s
Main Peakmeter Channel Group Settings
• Standard Settings Digtial: Digital
• Scale: Dig60dB
• Integration time: Sample
• PH Integration Time: Integration Time
• DC-Filter: 5 Hz
• Headroom: –9 dBFS
• Operation indicator area: 0 dB
• Standard Settings Analog: Din
• Scale: Din5dB
• Integration time: 10 ms
• PH Integration Time: Integration Time
• Operation indicator area: 0 dB
• VU-Lead: 0 dB
• Bargraph enabled: all
• SPL Reference indicator: enabled