RTW SurroundControl 31960 Series, Manual, Page: 380 / 430

9 | Menu | 9.7 | Generator and Surround Ident Settings: The Generator and Surround Ident Settings Menu EN-164 SurroundControl 31900/31960 Series
9.7 | Generator and Surround Ident Settings: The Generator and Surround Ident Settings Menu
Additionally, an audio fi le in WAV format loaded into the unit via
the network (also see
The BLITS Instrument chapter further
ahead) can be put in front of the ident signal sequences.
NOTE - The Generator is working independently of
the Test Signal Generator of the CAL instrument. Also, the
Surround Ident and Stereo Ident signal generators confi gu-
red on this page are working independently of the other gene-
rators in the unit.
This menu page is used to set the parameters of a permanent-
ly available simple test signal generator as well as the gene-
rators for ident signals in surround an stereo formats. To use
the generators, they must be activated and confi gured on the
menu page here and be routed to one or more digital outputs
with the combo boxes
Direct Out 3 and Direct Out 4 on the
Global Metering Output Routing menu page of the Global
Routing Settings menu page (see corresponding chapters
further ahead) or the corresponding menu pages of the Local
Routing . Options: Global Gen. , Blits , Stereo Ident .