RTW SurroundControl 31960 Series, Manual, Page: 274 / 430

8 | Instruments (Display Modes) | 8.2 | The Program Meter Instrument EN-58 SurroundControl 31900/31960 Series
9. On the Peakmeter Settings menu page, select one of
the other Channel Group buttons.
10. On the selected Channel Group menu page, edit settings
as described in step 7.
11. Repeat steps 8 to 10 for all Channel Groups you want to
edit.
12. Select the Save & Exit button to store the changes and
leave the menu. The Save Preset menu page is displayed.
13. Select a User Preset of your choice to store your settings
in.
14. Use the Change name button to edit the preset name. A
keyboard display is shown to enter a new preset name (6
characters maximum).
15. Select the Save & Exit button again. All changes are
stored and the unit returns to normal operation.
8.2.1.1 | Changing the parameters of the Peak Program Meter
Many parameters of PPM bargraphs, the peak hold function and the loudness indicators can be edited in the Channel Group
menus accessible by selecting the according Peakmeter Settings buttons.
Please proceed as follows to access these menus from normal display operation:
1. Press MENU . The unit changes to menu mode.
2. Select the Edit selected preset button.
3. Select the Local Input/Output Routing and Instrument
Settings menu tab. The Local Routing Settings menu is
shown.
4. Select the Monitoring Input Routing button.
5. Select the Peakmeter Settings button for the Monito-
ring Routing section (or another Peakmeter Settings
button for the peakmeter bargraphs you want to change).
6. On the Peakmeter Settings menu page, select the
Channel Group 1
button.
7. On the Peakmeter – Channel Group 1 menu page,
combo boxes, list boxes, check boxes and buttons are
used to make the appropriate changes, e.g. measuring
standards, scales, color setups etc..
8. Select the Close button. You will get back to the previous
menu page.