RTW SurroundControl 31960 Series, Manual, Page: 269 / 430

EN-53 8 | Instruments (Display Modes) | 8.1 | Controlling the instruments
EN
SurroundControl 31900/31960 Series
8.1 | Controlling the instruments
The instruments and their functions can be operated in three
different ways: With the keys of the Remote Control 30050
unit (31900 series) resp. the control panel of the 31960
8 | Instruments (Display Modes)
The Remote Control 30050 (31900 series) has one red Se-
lect key , the control panel of the 31960 series and the Remo-
te Display 30010 have two red Select keys . These keys are
used to confi rm selections in the menus. When using the opti-
onal mouse, the left mouse key is used to confi rm selections.
The buttons displayed in the Toolbar are numbered. These
numbers correspond to the numbers below the function keys
on the Remote Control 30050 unit.
In addition to pushbuttons and switch function buttons, the
Toolbar also includes displays for the current
input and out-
put status . When pressing the Input key or clicking the Input
button on the Toolbar the numbered buttons in the Toolbar
display the Sub Presets with the available input sources for the
current selected preset. Pressing the
Output key or clicking
the Toolbar output button changes the current output as defi -
ned for the
Output Key Mode in the Input/Output Routing
menus (detailed description in previous section and in the fol-
lowing chapter).
8.1.1 | The Control Keys and the Toolbar
The Remote Control 30050 (31900 series) resp. the control
panel of the 31960 series and the Remote Display 30010
have a total of 11 keys for operating the SurroundControl sys-
tems. On-screen buttons providing the same control functions
for access with an optional mouse are displayed in the Toolbar
in window 1 of the display.
The functions assigned to function keys 1 to 7 change de-
pending on the current system mode. The functions that are
currently active are displayed in the Toolbar. These keys can
function as either pushbuttons or switches, and they can also
be used to toggle settings with up to three options for some
instruments. The current option is highlighted and you can
switch between the available options by pressing the key or
clicking the corresponding button repeatedly.
Two pairs of control keys are located below the function keys
on the Remote Control 30050 (31900 series) and to the
left and right of the function keys on the control panel of the
31960 series and on the Remote Display 30010:
• MODE Switches between Function Select and Instru-
ment Select modes.
• MORE Moves down to the next Toolbar layer. When you
are on the last available layer, selecting MORE
returns you to the fi rst layer. This Toolbar button
is greyed out if only one layer is available.
• MENU Accesses the confi guration menu for viewing
and adjusting settings.
• INSTR Stands for „Instrument“ and switches the focus
between window 2 and window 3.
In the confi guration menus, these four keys are used as cursor
keys.
series, with an optional computer mouse using the controls
displayed in the Toolbar on the screen (window 1), or with the
control keys on the optional Remote Display 30010.