RTW SurroundControl 31960 Series, Manual, Page: 249 / 430

EN-33 6 | First Use | 6.12 | Changing Scales and Reference Levels
EN
SurroundControl 31900/31960 Series
6.12 | Changing Scales and Reference Levels
The SurroundControl units are supporting many different reference level settings.
4. For saving your settings and leaving the menu system
press the Save & Exit key. The screen shows the Save
Global Settings? page.
5. Confi rm saving the global settings by again pressing the
Save & Exit key. The unit stores the settings and returns
to normal operation mode.
6. For aborting your settings and leaving the menu system
without any changes repeatedly press the Abort key until
the unit returns to normal operation mode.
To modify these global parameters, plesae proceed as
follows:
1. From normal display operation, press the MENU key.
Accessing the menu for the fi rst time after power on will
take some seconds for initialization.
2. Normally, the Instrument Settings menu tab with the Ins-
trument Settings menu is shown fi rst. Use the cursor keys
< and > to select one of the Reference Levels menu tab.
The Reference Levels menu page is shown.
3. Make the desired changes on the Reference Levels
menu page.