RTW SurroundControl 31960 Series, Manual, Page: 244 / 430

6 | First Use | 6.8 | Changing Menu Settings EN-28 SurroundControl 31900/31960 Series
6.8 | Changing Menu Settings
The menu system accesses all local parameters stored in presets as well as global settings that remain unchanged even after
loading new presets.
To change global settings, please proceed as follows:
1. From normal display operation, press the MENU key.
Accessing the menu for the fi rst time after power on will
take some seconds for initialization.
2. Normally, the Instrument Settings menu tab with the
Instrument Settings menu is shown fi rst. But this menu
page exclusively includes the sub menus with the settings
of the
local parameters.
3. Therefore use the cursor keys < and > to select one of
the other menu tabs including the menu pages with the
global settings (independent from loaded preset).
4. Use the cursor keys

and

and the red Sel key or use
the mouse to make the required changes of the global
parameters.
5. For saving your settings and leaving the menu system
press the Save & Exit key. The screen shows the Save
Global Settings? page.
6. Confi rm saving the global settings by again pressing the
Save & Exit key. The unit stores the settings and returns
to normal operation mode.
7. For aborting your settings and leaving the menu system
without any changes repeatedly press the Abort key until
the unit returns to normal operation mode.
Cursor keys Cursor keys Function keys to save or to abort settings
Menu tabs with global parameters Menu tab with local parameters