EN-23
6 | First Use | 6.5 | Switching Input Sources by using Sub Presets
EN
SurroundControl 31900/31960 Series
6.5 | Switching Input Sources by using Sub Presets
2. Select the Sub Preset of your choice by pressing one of
the numbered keys
1
to
7
. The new Sub Preset will be
loaded instantly. The unit will use the input signals fed to
the connector defi ned in the Sub Preset.
NOTE -
In case the routing settings of the selected
Sub Preset do not fi t your connecting scheme you will have
to adapt the routing setup of the preset. Please refer to para-
graph
Adapting the Routing
for more details about this.
To switch between the (up to) 7 Sub Presets available in
a Factory or User Preset, please proceed as follows:
1. Press
the
Input
key. The corresponding Input button in
the Toolbar is located above the
MODE
and the
MORE
button and always shows the currently loaded Sub Preset.
The
Input
key on the Remote Control 30050 lights
up. Now the names of the 7 Sub Presets and the input
connector they use are shown in the buttons
1
to
7
of the
Toolbar.
Used input
connectors
Toolbar
(Window 1)
Name of the
Sub Presets
Input
button
Summary of Contents for SurroundControl 31960 Series
