RTW DigitalMonitor 10500X-PLUS, Operating Manual

Page: 164 / 251

RTW DigitalMonitor 10500X-PLUS 164
E 4.1.1 Changing PPM parameters
Many parameters of the PPM bargraphs, the peak hold function and the
loudness indicators can be changed with the Program Meter section of the
Modify Preset menu.
To access this menu from normal display operation please proceed
as following:
1. Press and hold the currently marked MODE/SET button until the unit
changes to main menu mode.
2. Use Up or Dwn key to set the red cursor on the Modify Preset option and
enter this selection by pressing the Sel (SELECT) key.
3. Use Up or Dwn key to set the red cursor on the Program Meter option
and enter this selection by pressing the Sel (SELECT) key.
4. Use Up or Dwn key to highlight one of the first two selections:
• Mode lets you change the channel configuration for the bargraphs by
pressing the Sel (SELECT) key repeatedly when highlighted.
• more .. opens a submenu by pressing the Sel (SELECT) key once when
highlighted. The submenu offers several options to change Color-Set-
ups, routings, measuring standards, scales and ballistics of the PPM
bargraphs (among many others).
Fig. E 4-3: PPM Digital menu display with PPM parameters
E 4 Display Modes • E 4.1 Program Meter: PPM mode