RTW DigitalMonitor 10500X-PLUS, Operating Manual

Page: 139 / 251

RTW DigitalMonitor 10500X-PLUS 139
E 2 Key Features
The DigitalMonitor 10500X-PLUS features several display modes for analy-
zing stereo audio signals in various ways. The display can be divided into
up to three sections to show three different instruments in parallel.
Fig. E 2-1: The display elements of the DigitalMonitor 10500X-PLUS
The right display section ( Program Meter , see Fig. E 2-1) is used for the
Loudness Meter or the Peak Program Meter and bargraphs plus, if desired,
an additional SPL or Leq bargraph.
The topmost left display section ( Multi Instrument 1 , see Fig. E 2-1) is used
for several graphical display modes like the Stereo Sound Analyzer, RTA or
vectorscope. It can as well show AES status data of the digital input signals
in text format.
The smaller display section on the left ( Multi Instrument 2 , see Fig. E 2-1)
is used for text-based information display like Dialnorm values, status sum-
mary or numerical display of the loudness, level, SPL and over values.
Note:
A short description and examples for the displays of the instruments follow
on the next pages. For more detailed information about the Display Modes
of the DigitalMonitor 10500X-PLUS and how to get there please refer to
Chapter 4: Display Modes.
Program Meter:
ITU Loudness Meter (ITU BS.1771),
Peak Program Meter,
SPL-/Leq-bargraph
Multi Instrument 1:
graphical display modes (instruments)
and AES status data
Multi Instrument 2: text-based information display
Multi Instrument 1 Program Meter
Multi Instrument 2
See Chapter E 4 for details
E 2 Key Features