RTW 10689, Operating Manual

Page: 159 / 186

RTW DigitalMonitor 8ch 10689 159
E 6.3 Connection
The DigitalMonitor 8ch 10689 features connectors for four digital inputs, four
digital outputs, a remote control connector, a VGA output and a locking 4-pin
low voltage connector for power supply (see Fig. E 6-1).
The audio I/O’s are balanced.
E 6.3.1 Connecting INPUT and OUTPUT: Signal connection
The incoming AES3 signals are passively looped through from the input
connector to the output connector.
25-pin Sub-D-F connectors
Pin: Function:
7 input resp. output digital (AES3) 4 (+, hot)
20 input resp. output digital (AES3) 4 (–, cold)
8 shield/case
21 input resp. output digital (AES3) 3 (+, hot)
9 input resp. output digital (AES3) 3 (–, cold)
22 shield/case
10 input resp. output digital (AES3) 2 (+, hot)
23 input resp. output digital (AES3) 2 (–, cold)
11 shield/case
24 input resp. output digital (AES3) 1 (+, hot)
12 input resp. output digital (AES3) 1 (–, cold)
25 shield/case
E 6.3.2 Connecting REMOTE: External function control connection
15-pin Sub-D-F connector
Pin: Function:
1 common potential for external switches
9 external function control: FUNC 1
2 external function control: FUNC 2
3 external function control: CHAN
6 external function control: MODE 1/SET
7 external function control: MODE 2/SET
8 external function control: SELECT
(External view of the connector)
P i n 1 4
P i n 1 5
P i n 1 6
P i n 1 7
P i n 1 8
P i n 1 9
P i n 2 0
P i n 2 1
P i n 2 2
P i n 2 3
P i n 2 4
P i n 2 5
P i n 1
P i n 2
P i n 3
P i n 4
P i n 5
P i n 6
P i n 7
P i n 8
P i n 9
P i n 1 0
P i n 1 1
P i n 1 2
P i n 1 3
(
External view of the connector
)
E 6 Installation • E 6.3 Connection