Enter Setup
RT
23
0H
Us
er
Gu
id
e
** Exit Setup
36
Specify Central Area
The default central area is a (Width*20%) by (Height*20%) area in the center of the RT230H
’
s field of view, as
shown in the figure below. You can define the central area by scanning the
Specify Central Area
barcode and
numeric barcode(s) corresponding to a desired percentage (1-100). If Central Area Decoding is enabled by
scanning the
Central Area Decoding
barcode, the RT230H only reads barcodes that intersect the predefined
central area.
To learn how to program this parameter, see the
“
Appendix 5: Parameter Programming Examples
”
.
Specify Central Area
