Enter Setup
RT
23
0H
Us
er
Gu
id
e
RT
23
0H
Us
er
Gu
id
e
33
*
* Exit Setup
Continuous Mode
This mode enables the RT230H to scan/capture, decode and transmit over and over again.
When the RT230H is operating in Continuous Mode, barcode reading can be suspended/resumed through
the trigger button. Press the trigger button to stop continuous scanning, press again to resume barcode
reading.
Continuous Mode
Decode Session Timeout
This parameter sets the maximum time decode session continues during a scan attempt. It is programmable
in 1ms increments from 0ms to 3,600,000ms. The default setting is 3,000ms. To learn how to program this
parameter, see
Appendix 5
.
Decode Session Timeout
Timeout between Decodes
This parameter sets the timeout between decode sessions. When a decode session ends, next session will not
happen until the timeout between decodes expires. It is programmable in 1ms increments from 0ms to
65,535ms. The default setting is 1,000ms. To learn how to program this parameter, see
Appendix 5
.
Timeout between Decodes
