Enter Setup
RT
23
0H
Us
er
Gu
id
e
RT
23
0H
Us
er
Gu
id
e
11
*
* Exit Setup
Barcode Programming
Scanning the
Enter Setup
barcode can enable the RT230H to enter the setup mode. Then you can scan a
number of programming barcodes to configure your RT230H. To exit the setup mode, scan the
Exit Setup
barcode.
If the RT230H has exited the setup mode, only some special programming barcodes, such as the
Enter Setup
barcode and
Restore All Factory Defaults
barcode, can be read.
Enter Setup
** Exit Setup
Programming barcode data can be transmitted to the Host. Scan the appropriate barcode below to enable or
disable the transmission of programming barcode data (i.e. the characters under programming barcode) to
the Host.
Restarting the RT230H will automatically disable the transmission of programming barcode data to the Host.
Transmit Programming Barcode Data
** Do Not Transmit Programming Barcode Data
Factory Defaults
Scanning the following barcode can restore the RT230H to the factory defaults. See
Appendix 1: Factory
Defaults Table
for more information.
Note:
Use this feature with discretion.
