Enter Setup
RT
23
0H
Us
er
Gu
id
e
** Exit Setup
10
Chapter 1 Getting Started
About This Guide
This guide provides programming instructions for the RT230H. Users can configure the RT230H by scanning
the programming barcodes included in this manual.
The RT230H has been properly configured for most applications and can be put into use without further
configuration. Users may check the
Factory Defaults Table
in
Appendix
for reference. Throughout the
manual, asterisks (**) indicate factory default values.
Introduction
Steps to setup the scanner:
Scan the
“
Enter Setup
”
> scan setting codes(one or more) > Scan
“
Exit Setup
”
setting code
Barcode Scanning
Powered by area-imaging technology and RTscan new technology, the RT230H features fast scanning and
accurate decoding. Barcodes rotated at any angle can still be read with ease. When scanning a barcode,
simply center the aiming beam or pattern projected by the RT230H over the barcode.
