Enter Setup
47 *
* Exit Setup
RT20
8
User
G
u
ide
Custom Suffix
Enable/Disable Custom Suffix
If custom suffix is enabled, you are allowed to append to the data a user-defined suffix that cannot exceed
11 characters.
Enable Custom Suffix
**
Disable Custom Suffix
Set Custom Suffix
To set a custom suffix, scan the
Set Custom Suffix
barcode and the numeric barcodes representing the
hexadecimal values of a desired suffix and then scan the
Save
barcode. Refer to
Appendix 4: ASCII
Table
for hexadecimal values of characters.
Note:
A custom suffix cannot exceed 11 characters.
Set Custom Suffix
Example: Set the custom suffix to
“CODE”
1. Check the hex values of
“CODE”
in the ASCII Table. (
“
CODE
”
: 43, 4F, 44, 45)
2. Scan the
Enter Setup
barcode.
3. Scan the
Set Custom Suffix
barcode.
4. Scan the numeric
barcodes “4”
,
“3”
,
“4”
,
“F”
,
“4”
,
“4”
,
“4”
and
“5”
.
5. Scan the
Save
barcode.
6. Scan the
Exit Setup
barcode.
