Enter Setup
** Exit Setup
42
RT20
8
User
G
u
ide
Custom Prefix
Enable/Disable Custom Prefix
If custom prefix is enabled, you are allowed to append to the data a user-defined prefix that cannot
exceed 11 characters.
Enable Custom Prefix
** Disable Custom Prefix
Set Custom Prefix
To set a custom prefix, scan the
Set Custom Prefix
barcode and the numeric barcodes representing the
hexadecimal values of a desired prefix and then scan the
Save
barcode. Refer to
Appendix 4: ASCII
Table
for hexadecimal values of characters.
Note:
A custom prefix cannot exceed 11 characters.
Set Custom Prefix
Example: Set the custom prefix to
“CODE”
1. Check the hex values of
“CODE”
in the ASCII Table. (
“
CODE
”
: 43, 4F, 44, 45)
2. Scan the
Enter Setup
barcode.
3. Scan the
Set Custom Prefix
barcode.
4. Scan the numeric
barcodes “4”
,
“3”
,
“4”
,
“F”
,
“4”
,
“4”
,
“4”
and
“5”
.
5. Scan the
Save
barcode.
6. Scan the
Exit Setup
barcode.
