FIGURE 5.
Internal DIP Switch Locations
TABLE 3.
Ring Count Settings
# of Rings
SW1
SW2
1
off
off
2
on
off
4
off
on
8
on
on
TIF-2000A
Installation and Operation 15
Point-to-Point Seize
Switch 4 turns on and off the point-to-point feature. When the switch is in the off position, normal line seize operation (via a
keypanel) is selected. When the switch is in the on position, a line is seized immediately upon the designated TIF2000A’s talk
key being pressed via the keypanel.
One Touch Dial
Switch 5 enables/disables the One Touch Dialing feature. When the switch is in the off position, one touch dialing is disabled.
When the switch is in the on position, one touch dialing is enabled.
One touch dialing works as follows - If a number is stored in auto-dial memory 1 on the TIF2000A, and the line is on hook, the
TIF2000A auto-dials the number stored in the auto-dial memory1 whenever any keypanel closes a point-to-point talk key to
the TIF-2000A.