RTS SIP-ISDN, Hardware & Software Manual, Page: 25 / 102

25
5 W I N D O W S P C S O F T W A R E
The configuration of the system is particularly comfortable via the Windows PC Soft-
ware included in delivery.
5.1 Hardware requirements
The PC must meet the following minimum requirements:
– IBM PC AT, IBM PS/2 or 100% compatible
– Pentium Processor (> 500 MHz) recommended
– Windows 2000/XP
– ca. 600 kilobyte available RAM
– 5 MB available hard disk space
– Screen resolution with 800 x 600 Pixels
– at least one available serial interface RS-232
– Microsoft, IBM PS/2 or 100% software compatible mouse
5.2 Installing the Windows PC Software
Please insert the CD included in delivery in your CD-ROM drive. The software automat-
ically starts your Internet browser. Possible safety warnings can be ignored for the mo-
ment. Please press under
Install Software the RTS SIP-ISDN button. Subsequently,
the setup program is executed.
Alternatively, you can install the software directly from the CD. You will find the instal-
lation file
setup.exe in the folder Software\RTS SIP-ISDN on the CD.
Please follow the instructions of the installation routine.
After the installation the software can be started by clicking on the RTS SIP-ISDN .
Please connect your PC via a serial 1:1 cable (only Pin 2 and Pin 3 are used, Pin
5=ground) with the system.
The standard COM Port settings are: PC (19200 Baud)